ReAX Control Systems | Aurora Multimedia: Helpdesk

by Chris Koerner

We occasionally get questions regarding the sequence ID in the VISCA over IP camera control protocol. Per the official documentation, the sequence number is a 4 byte packet in the message header that ...

Oct 31, 2023

0 491

ReAX Control Systems

How to apply CSS styles to specific UI elements in

by Chris Koerner

You can apply CSS styles in a few different ways in Core Studio: Global styles using ThemeRoller Mobile Using a custom CSS file Using JS to apply CSS styles Option #2 is implemented similar to option ...

Control System Software Core Studio

Aug 30, 2023

0 389

ReAX Control Systems

Aurora Network Discovery Protocol

by Chris Koerner

You can use UDP to discover Aurora devices on the network. The data returned will include the device type, serial number, host name, IP, and Mac address. Using Hercules (or other terminal program), se...

Aug 30, 2023

0 719

ReAX Control Systems

DXB-8i & DXI Programming Quickstart Guide

by Chris Koerner

DXI-8i Quickstart Guide Sending Serial Data: To send serial data, simply type the serial command into the appropriate box on the intended button. Any hexadecimal data should be preceded by a percent s...

DXB-8i DXI

Aug 30, 2023

0 617

ReAX Control Systems

Troubleshooting RS-232 Communications

by Chris Koerner

RS-232 is a tried and true control protocol, which is still widely used today in pro AV. While most devices these days can be controlled using some sort of network control, RS-232 has the distinct adv...

Aug 11, 2023

0 922

ReAX Control Systems

Core Studio Training Videos

by Chris Koerner

The ReAX ecosystem encompasses dedicated hardware control processors, touch panels, button panels, and other hardware devices; as well as free software used for programming. Check out our Aurora Acade...

Control System Software Core Studio

Aug 11, 2023

0 805

ReAX Control Systems

Updating TAURI firmware via FTP

by Chris Koerner

Connect to TAURI using an FTP client such as Filezilla , or by following this guide on your PC. In this example TAURI’s IP is 192.168.1.18. You can find your TAURI’s IP address on the WiFi or Ethernet...

TAURI Series

Aug 11, 2023

0 358

Restoring TAURI to factory default settings

by Chris Koerner

In order to reset your TAURI tablet to its factory default settings, swipe your finger all the way from the left side of the screen to the right side of the screen. When the password prompt appears, e...

TAURI Series

Aug 11, 2023

0 374

Configuring email alerts with TAURI

by Chris Koerner

Once you have installed the latest firmware from the Aurora Customer Portal , navigate to the web page of the TAURI ( http://ipaddress/setup ). Log in with the default username and password (admin), t...

TAURI Series

Aug 11, 2023

0 341

ReAX Control Systems

TAURI environmental calibration

by Chris Koerner

TAURI tablets come factory calibrated from the factory. However, variations in environmental conditions do have the potential to impact readings. The calibration process requires that your TAURI table...

TAURI Series

Aug 11, 2023

0 339

ReAX Control Systems

Sending a Wake-on-LAN (WoL) message

by Chris Koerner

Wake-on-LAN is a standard that allows a computer to be turned on by a network message. This message is sent on the data link layer (layer 2 in the OSI model), and broadcast to all devices on the netwo...

Control System Software

Aug 11, 2023

0 460

ReAX Control Systems

Helpful tips for using Telnet and TCP in ReAX Core Studio

by Chris Koerner

Telnet Actions in Core Studio are used to send Telnet and TCP data to a specific IP:port. Without a Telnet Event listening for data from that same IP:port, the Action will open the socket, send the co...

Control System Software Core Studio

Aug 11, 2023

0 809

ReAX Control Systems

HINT!

Click on the category to browse FAQs or manage its existing FAQs.

HINT!

Tags