ReAX Control Systems | Aurora Multimedia: Helpdesk

TAURI environmental calibration

by Chris Koerner

TAURI tablets come factory calibrated from the factory. However, variations in environmental conditions do have the potential to impact readings. The calibration process requires that your TAURI table...

TAURI Series

Aug 11, 2023

0 482

Sending a Wake-on-LAN (WoL) message

by Chris Koerner

Wake-on-LAN is a standard that allows a computer to be turned on by a network message. This message is sent on the data link layer (layer 2 in the OSI model), and broadcast to all devices on the netwo...

Control System Software

Aug 12, 2023

0 623

ReAX Control Systems

Helpful tips for using Telnet and TCP in ReAX Core Studio

by Chris Koerner

Telnet Actions in Core Studio are used to send Telnet and TCP data to a specific IP:port. Without a Telnet Event listening for data from that same IP:port, the Action will open the socket, send the co...

Control System Software Core Studio

Aug 12, 2023

0 1026

ReAX Control Systems

How to upgrade QXP-2/QXT-7 control processor (legacy) with ReAX OS

by Chris Koerner

The QXP-2 and QXT-7 control processor can be upgraded with ReAX OS. Once updated, existing YIPI5 / WOWE projects can be ported to Core Studio, or new project created and published via Core Studio. Bel...

Control System Hardware

Aug 11, 2023

0 561

Using Aurora devices as port extenders

by Chris Koerner

Within the Aurora control system lineup, you may think of the LXC-1 primarily as a networked port extender. But did you know that any Aurora control system (including DXB-8i button panels and legacy d...

Aug 11, 2023

0 852

Convert legacy YIPI5/WOWE project to Core Studio

by Chris Koerner

Core Studio is the latest dev tool for the Reax Series controllers. If you want to re-purpose an older project that was ceated in YIPI5 and WOWE, you can follow the below steps to convert/import to th...

Control System Software

Aug 11, 2023

0 644

How do I work with hexadecimal data in a ReAX system?

by Chris Koerner

Let's say you are working with a device that is controlled via serial or Telnet. The manufacturers manual specifies that the command requires sending hex data. What is this and how do you do that? The...

Control System Software

Aug 11, 2023

0 708

ReAX Control Systems

Prev
1
2
3
Next

HINT!

Click on the category to browse FAQs or manage its existing FAQs.

Tags

Entryway Experience / Temperature Tablet

TAURI Series

ReAX Control Systems

Control System Hardware Control System Software Core Studio

Others

ACS Sample Project ACSM Module Documentation DXB-8i DXI iPad