IPBaseT Manager: Rapid Deployment Tool by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. The exclusive Rapid Deployment Tool from Aurora Multimedia provides th... AV over IP IPX VLX VPX
IPBaseT Manager: PC Port Allocations by Aurora Multimedia Corp, Mike Twerdak IPBaseT Manager utilizes/requires the following ports for operation on host PC: 6970 3000,3001 - HTTP and HTTPS (In the upcoming releases these ports will change to 3535,3536 respectively) 69 -TFTP 51...
VPX: LG Video Wall, loss of video by Aurora Multimedia Corp, Mike Twerdak VPX: LG Video Wall, loss of video This was a scenario using LG Video wall monitors which have integrated video wall processing. ISSUE: The HDMI gets daisy chained from one monitor to the next and each...
VPX/VLX Streaming Preview Options by Chris Koerner Editor's note: this article was written focused on VPX, but the general concept applies to VPX and VLX products, unless where specified otherwise. VPX encoders and decoders provide a secondary strea... AV over IP Control System Software Core Studio VLX VPX
Using Direct Serial over IP (SoIP) with IPX by Chris Koerner Aurora 1Gbps AV over IP devices, the VLX and VPX series, support a direct serial over IP for communicating with the connected devices. When enabled, this allows you to talk bi-directionally to the ser...
Stacking vs. LAG ports for AV over IP by Chris Koerner This article was authored by Michael Dijk, System Engineer, Pro AV at Netgear Stacking in general is very good, because it allows one management address, and avoids you having to login to numerous IP ... AV over IP VLX VPX
VLX/VPX: Controlling a videowall by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Let's say you are setting up a 2x2 video wall using VLX or VPX. You will hav... AV over IP VLX VPX
VLX/VPX: Cat cable specifications by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Cat 5e UTP (Unshielded): 100m (330ft) Cat 6 UTP (Unshielded): 143m (470ft)... AV over IP VLX VPX
VLX/VPX: Video Wall Command Utility by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Here's a handy utility to generate the required commands when configuring ... AV over IP VLX VPX
Aurora DTE Dante Option Cards: Configuration Tool by Chris Koerner Aurora's IPE-DTE-1 cards provide Dante Network interoperability with your IPBaseT Network. Audinate's© Dante Controller is a free software application that enables you to configure devices on a Dante ... AV over IP IPX VLX
VLX: Toggle Encoder/Decoder Mode by Chris Koerner NOTE: The following article pertains to VLX firmware versions prior to 3.20.0. For 3.20.0 and newer, please refer to the update at the bottom of this article. The VLX transceiver provides an API comma... AV over IP VLX
VLX/VPX/IPX: Point-to-Point operation by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. For point-to-point applications, you can set two VLX units to stream w... AV over IP IPX VLX VPX