Aurora Knowledge Base

Browse the categories below to filter KB articles based on product type
Use the tags on the right to further filter KB articles
Use the search box to find specific articles

VLX/VPX: Raspberry Pi always selected as active input when plugged in

by Chris Koerner

Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. If you have used a Raspberry Pi with a VLX, you may have noticed that the VL...

AV over IP VLX VPX

Aug 11, 2023

0 307

Video Products

Core Studio Training Videos

by Chris Koerner

The ReAX ecosystem encompasses dedicated hardware control processors, touch panels, button panels, and other hardware devices; as well as free software used for programming. Check out our Aurora Acade...

Control System Software Core Studio

Aug 11, 2023

0 533

ReAX Control Systems

IPX: Video bandwidth calculation

by Chris Koerner

When configuring an IPX system with more than one network switch, bandwidth calculations must be performed to ensure that your uplinks do not get saturated. For example, if you have two switches with ...

AV over IP IPX

Aug 11, 2023

0 373

Video Products

Updating TAURI firmware via FTP

by Chris Koerner

Connect to TAURI using an FTP client such as Filezilla , or by following this guide on your PC. In this example TAURI’s IP is 192.168.1.18. You can find your TAURI’s IP address on the WiFi or Ethernet...

TAURI Series

Aug 11, 2023

0 260

ReAX Control Systems

Restoring TAURI to factory default settings

by Chris Koerner

In order to reset your TAURI tablet to its factory default settings, swipe your finger all the way from the left side of the screen to the right side of the screen. When the password prompt appears, e...

TAURI Series

Aug 11, 2023

0 261

ReAX Control Systems

Configuring email alerts with TAURI

by Chris Koerner

Once you have installed the latest firmware from the Aurora Customer Portal , navigate to the web page of the TAURI ( http://ipaddress/setup ). Log in with the default username and password (admin), t...

TAURI Series

Aug 11, 2023

0 239

ReAX Control Systems

TAURI environmental calibration

by Chris Koerner

TAURI tablets come factory calibrated from the factory. However, variations in environmental conditions do have the potential to impact readings. The calibration process requires that your TAURI table...

TAURI Series

Aug 11, 2023

0 253

ReAX Control Systems

Sending a Wake-on-LAN (WoL) message

by Chris Koerner

Wake-on-LAN is a standard that allows a computer to be turned on by a network message. This message is sent on the data link layer (layer 2 in the OSI model), and broadcast to all devices on the netwo...

Control System Software

Aug 11, 2023

0 311

ReAX Control Systems

Helpful tips for using Telnet and TCP in ReAX Core Studio

by Chris Koerner

Telnet Actions in Core Studio are used to send Telnet and TCP data to a specific IP:port. Without a Telnet Event listening for data from that same IP:port, the Action will open the socket, send the co...

Control System Software Core Studio

Aug 11, 2023

0 595

ReAX Control Systems

How to upgrade QXP-2/QXT-7 control processor (legacy) with ReAX OS

by Chris Koerner

The QXP-2 and QXT-7 control processor can be upgraded with ReAX OS. Once updated, existing YIPI5 / WOWE projects can be ported to Core Studio, or new project created and published via Core Studio. Bel...

Control System Hardware

Aug 11, 2023

0 305

ReAX Control Systems

Using Aurora devices as port extenders

by Chris Koerner

Within the Aurora control system lineup, you may think of the LXC-1 primarily as a networked port extender. But did you know that any Aurora control system (including DXB-8i button panels and legacy d...

Aug 11, 2023

0 376

ReAX Control Systems

Convert legacy YIPI5/WOWE project to Core Studio

by Chris Koerner

Core Studio is the latest dev tool for the Reax Series controllers. If you want to re-purpose an older project that was ceated in YIPI5 and WOWE, you can follow the below steps to convert/import to th...

Control System Software

Aug 11, 2023

0 331

ReAX Control Systems

HINT!

Click on the category to browse FAQs or manage its existing FAQs.

Aurora Knowledge Base

HINT!

Tags