DIDO X4: Updating Firmware by Aurora Multimedia Corp, Mike Twerdak DIDO-X4 Firmware Update Guide Updating firmware/bootloader via TFTP: To perform the DIDO-X4 FW update, you will need: A 3rd party TFTP client to complete. Aurora recommends the following opensource cl...
IPBaseT Manager: Rapid Deployment Tool by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. The exclusive Rapid Deployment Tool from Aurora Multimedia provides th... AV over IP IPX VLX VPX
VPX/VLX Streaming Preview Options by Chris Koerner Editor's note: this article was written focused on VPX, but the general concept applies to VPX and VLX products, unless where specified otherwise. VPX encoders and decoders provide a secondary strea... AV over IP Control System Software Core Studio VLX VPX
Using Direct Serial over IP (SoIP) with IPX by Chris Koerner Aurora 1Gbps AV over IP devices, the VLX and VPX series, support a direct serial over IP for communicating with the connected devices. When enabled, this allows you to talk bi-directionally to the ser...
VLX/VPX: Controlling a videowall by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Let's say you are setting up a 2x2 video wall using VLX or VPX. You will hav... AV over IP VLX VPX
VLX/VPX: Cat cable specifications by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Cat 5e UTP (Unshielded): 100m (330ft) Cat 6 UTP (Unshielded): 143m (470ft)... AV over IP VLX VPX
VLX/VPX: Video Wall Command Utility by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Here's a handy utility to generate the required commands when configuring ... AV over IP VLX VPX
VLX/VPX/IPX: Point-to-Point operation by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. For point-to-point applications, you can set two VLX units to stream w... AV over IP IPX VLX VPX
VLX/VPX: Raspberry Pi always selected as active input when plugged in by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. If you have used a Raspberry Pi with a VLX, you may have noticed that the VL... AV over IP VLX VPX