DIDO X4: Updating Firmware by Bryan Abelowitz - Demos, Mike Twerdak DIDO-X4 Firmware Update Guide Updating firmware/bootloader via TFTP: To perform the DIDO-X4 FW update, you will need: A 3rd party TFTP client to complete. Aurora recommends the following opensource cl...
IPBaseT Manager: Rapid Deployment Tool by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. The exclusive Rapid Deployment Tool from Aurora Multimedia provides th... AV over IP IPX VLX VPX
Using Direct Serial over IP (SoIP) with IPX by Chris Koerner Aurora 1Gbps AV over IP devices, the VLX and VPX series, support a direct serial over IP for communicating with the connected devices. When enabled, this allows you to talk bi-directionally to the ser...
VLX/VPX: Controlling a videowall by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Let's say you are setting up a 2x2 video wall using VLX or VPX. You will hav... AV over IP VLX VPX
Aurora DTE Dante Option Cards: Configuration Tool by Chris Koerner Aurora's IPE-DTE-1 cards provide Dante Network interoperability with your IPBaseT Network. Audinate's© Dante Controller is a free software application that enables you to configure devices on a Dante ... AV over IP IPX VLX
VLX/VPX/IPX: Point-to-Point operation by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. For point-to-point applications, you can set two VLX units to stream w... AV over IP IPX VLX VPX
IPX: Video bandwidth calculation by Chris Koerner When configuring an IPX system with more than one network switch, bandwidth calculations must be performed to ensure that your uplinks do not get saturated. For example, if you have two switches with ... AV over IP IPX