VLX/VPX: Controlling a videowall by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Let's say you are setting up a 2x2 video wall using VLX or VPX. You will hav... AV over IP VLX VPX
VLX/VPX: Cat cable specifications by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Cat 5e UTP (Unshielded): 100m (330ft) Cat 6 UTP (Unshielded): 143m (470ft)... AV over IP VLX VPX
VLX/VPX: Video Wall Command Utility by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Here's a handy utility to generate the required commands when configuring ... AV over IP VLX VPX
Aurora DTE Dante Option Cards: Configuration Tool by Chris Koerner Aurora's IPE-DTE-1 cards provide Dante Network interoperability with your IPBaseT Network. Audinate's© Dante Controller is a free software application that enables you to configure devices on a Dante ... AV over IP IPX VLX
VLX: Secondary firmware mode by Chris Koerner If a VLX's firmware becomes corrupt due to a failed update and becomes inaccessible on the network, you may be able to recover it by entering secondary firmware mode. For VLX-TCW2V-C and VLX-TCW2H-C, ... AV over IP VLX
VLX/VPX: Raspberry Pi always selected as active input when plugged in by Chris Koerner Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. If you have used a Raspberry Pi with a VLX, you may have noticed that the VL... AV over IP VLX VPX