Blog Posts | Aurora Multimedia: Helpdesk

No results found for 'amcap'. Showing results for 'amp'.

7 Articles

amp × AV over IP ×

VPX/VLX Streaming Preview Options

by Chris Koerner

Editor's note: this article was written focused on VPX, but the general concept applies to VPX and VLX products, unless where specified otherwise. VPX encoders and decoders provide a secondary strea...

AV over IP Control System Software Core Studio VLX VPX

Oct 23, 2023

0 590

Video Products

Stacking vs. LAG ports for AV over IP

by Chris Koerner

This article was authored by Michael Dijk, System Engineer, Pro AV at Netgear Stacking in general is very good, because it allows one management address, and avoids you having to login to numerous IP ...

AV over IP VLX VPX

Aug 24, 2023

0 576

VLX/VPX: Controlling a videowall

by Chris Koerner

Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Let's say you are setting up a 2x2 video wall using VLX or VPX. You will hav...

AV over IP VLX VPX

Aug 11, 2023

0 605

Video Products

VLX/VPX: Video Wall Command Utility

by Chris Koerner

Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX and VPX products. Here's a handy utility to generate the required commands when configuring ...

AV over IP VLX VPX

Aug 11, 2023

0 443

Aurora DTE Dante Option Cards: Configuration Tool

by Chris Koerner

Aurora's IPE-DTE-1 cards provide Dante Network interoperability with your IPBaseT Network. Audinate's© Dante Controller is a free software application that enables you to configure devices on a Dante ...

AV over IP IPX VLX

Aug 11, 2023

0 503

VLX/VPX/IPX: Point-to-Point operation

by Chris Koerner

Editor's note: this article was originally written focused on VLX, but the general concept applies to VLX, VPX, and IPX products. For point-to-point applications, you can set two VLX units to stream w...

AV over IP IPX VLX VPX

Aug 11, 2023

0 659

IPX: Video bandwidth calculation

by Chris Koerner

When configuring an IPX system with more than one network switch, bandwidth calculations must be performed to ensure that your uplinks do not get saturated. For example, if you have two switches with ...

AV over IP IPX

Aug 11, 2023

0 536

HINT!

Click on the category to browse FAQs or manage its existing FAQs.

Tags

Audio Products

Entryway Experience / Temperature Tablet

TAURI Series

ReAX Control Systems

Control System Hardware Control System Software Core Studio

Video Products

AV over IP IPX VLX VPX

Others

ACS Sample Project DXB-8i DXI iPad