VPX/VLX Streaming Preview Options by Chris Koerner Editor's note: this article was written focused on VPX, but the general concept applies to VPX and VLX products, unless where specified otherwise. VPX encoders and decoders provide a secondary strea... AV over IP Control System Software Core Studio VLX VPX
Sending a Wake-on-LAN (WoL) message by Chris Koerner Wake-on-LAN is a standard that allows a computer to be turned on by a network message. This message is sent on the data link layer (layer 2 in the OSI model), and broadcast to all devices on the netwo... Control System Software
Helpful tips for using Telnet and TCP in ReAX Core Studio by Chris Koerner Telnet Actions in Core Studio are used to send Telnet and TCP data to a specific IP:port. Without a Telnet Event listening for data from that same IP:port, the Action will open the socket, send the co... Control System Software Core Studio
How do I work with hexadecimal data in a ReAX system? by Chris Koerner Let's say you are working with a device that is controlled via serial or Telnet. The manufacturers manual specifies that the command requires sending hex data. What is this and how do you do that? The... Control System Software