ACS Sample - IR Learning with ReAX Controllers by Chris Koerner The video and sample files below cover the topic of how to learn and use IR commands that you will be sending from RXC, RXT, LXC, and DXB controllers. Note: The method for sending IR from VLX and VPX ... ACS Sample Project Control System Hardware Control System Software Core Studio
VPX/VLX Streaming Preview Options by Chris Koerner Editor's note: this article was written focused on VPX, but the general concept applies to VPX and VLX products, unless where specified otherwise. VPX encoders and decoders provide a secondary strea... AV over IP Control System Software Core Studio VLX VPX
Sending a Wake-on-LAN (WoL) message by Chris Koerner Wake-on-LAN is a standard that allows a computer to be turned on by a network message. This message is sent on the data link layer (layer 2 in the OSI model), and broadcast to all devices on the netwo... Control System Software
Convert legacy YIPI5/WOWE project to Core Studio by Chris Koerner Core Studio is the latest dev tool for the Reax Series controllers. If you want to re-purpose an older project that was ceated in YIPI5 and WOWE, you can follow the below steps to convert/import to th... Control System Software
How do I work with hexadecimal data in a ReAX system? by Chris Koerner Let's say you are working with a device that is controlled via serial or Telnet. The manufacturers manual specifies that the command requires sending hex data. What is this and how do you do that? The... Control System Software