Start a conversation

QXP-2 / QXT-700: Factory Reset

To Factory Reset:

Use a serial terminal program, such as Hercules with correctly selected com port and baudrate setting @ 115200, and connect your serial terminal to com port #1 of controller. 

You can then access boot menu by:

  • Power down unit.
  • Press-n-hold setup button at the back of unit.
  • Apply power. 

You should see the boot menu after about 8 seconds, then you can press option 1 to reset defaults.  This will reset the IP of the unit to static 192.168.1.10.  Adjust your PC network setting accordingly to access web settings at URL:  192.168.1.10/setup.


Default user/password is admin/admin.

Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. Mike Twerdak

  2. Posted

Comments